Technical data
1
IPX4 classification means that the electrical system is protected against spray water.
IPX1 classification means that the charger is protected against vertically falling drops of water.
2
Static stability downhill, uphill, and sideways according to ISO 7176-1 = 9° (15.8 %)
Dynamic stability uphill according to ISO 7176-2 = 6° (10.5 %)
3
Note: The drive range of a mobility device is strongly influenced by external factors, such as the speed setting of the
wheelchair, the charging state of the batteries, surrounding temperature, local topography, road surface characteristics,
tire pressure, weight of user, drive style and use of batteries for lighting, servos etc.
The specified values are theoretical maximum achievable values measured according to ISO 7176-4.
4
Measured with solid tires. Pneumatic tires can increase the maximum total width.
5
Measured without seat cushion
7
Horizontal distance of wheel axle from intersection of loaded seat and backrest reference planes
8
The actual curb weight depends on the options and accessories your mobility device has been supplied with. Every
Invacare mobility device is weighed when leaving the factory. Refer to the invoice for the curb weight (including
batteries) measured.
9
If two values are possible the lowest always applies.
12.2 ISO 7176-15 Annex A
Information Disclosure in Manufacturer’s Specification
Sheets
Manufacturer: Invacare Corporation
Address: 1200 Taylor Street, Elyria, OH 44035
Model: TDX-SP2 (LiNX and Ultra Low Maxx Seat)
Maximum occupant mass:
•
Non-Elevate—300 lb (136 kg)
•
Elevate—250 lb (113 kg)
TDX-SP2
Disclosure Information
(ISO)
Minimum
Maximum
Overall length with
legrest
44 in (1120
mm)
50 in (1265
mm)
Overall width
29 in (730 mm)
35 in (900 mm)
60101831-A
81
Summary of Contents for TDXSP2
Page 72: ...Invacare TDX SP2 Series psi bar 38 2 6 39 2 7 41 2 8 44 3 0 72 60101831 A ...
Page 86: ...Notes ...
Page 87: ...Notes ...
