Invacare TDXSP2 User Manual Download | Manualshive

Page: 50 / 88

background image

Invacare® TDX® SP2 Series

Dead or damaged batteries can be given back to your
provider or directly to Invacare.

7.2.11 General Information on Battery Installation

WARNING!
Risk of Injury or Damage

Improper installation of the battery can result in
injury or damage.

– Batteries can weigh up to 52 lbs (23.6 kg).

ALWAYS use a battery lifting strap when lifting
the battery. It is the most reliable method of
carrying a battery and preventing serious injury.

WARNING!
Risk of Injury or Damage

Improper lifting technique may cause injury or
damage.

– Use proper lifting techniques, assistance and

gear such as straps when available when lifting
heavy loads.

WARNING!
Risk of Injury

Exposure to battery acid may result in injury.

– The use of rubber gloves is recommended

when working with batteries.

– DO NOT allow the liquid in the battery to

come in contact with skin, clothes or other
possessions. It is a form of acid and harmful or
damaging burns may result. Should the liquid
touch your skin, wash the area IMMEDIATELY
and thoroughly with cool water. In serious
cases or if eye contact is made, seek medical
attention IMMEDIATELY.

– DO NOT install/reinstall a battery with a cracked

or otherwise damaged case.

50

60101831-A

«
...
48
49
50
51
52
...
»

Summary of Contents for TDXSP2

























































































Reviews:

No comments

Related manuals for TDXSP2

Brand: TA Service Pages: 30

Brand: Rebotec Pages: 12

Brand: Airwheel Pages: 21

Brand: Pride Mobility Pages: 2

ADI Q-Back 2.0 AFT Series

Brand: Stealth Products Pages: 20

Milo OP-PECLB2-MILO-E

Brand: RST Pages: 15

Brand: Quantum Rehab Pages: 47

Brand: Küschall Pages: 40

Brand: Pride Pages: 51

PATHRIDER 130 XL

Brand: Pride Pages: 48

Brand: Stealth Pages: 48

Brand: HMN Pages: 16

Brand: Costway Pages: 3

Brand: Karma Pages: 96

Brand: Unicare Health Pages: 20

Feather Power Chair

Brand: Feather Chair Pages: 28

Quickie Freestyle M11

Brand: Quickie Pages: 40

Solstice Comfort

Brand: Days Pages: 144

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands