Invacare TDXSP2 User Manual Download

Page: 69 / 88

Maintenance

CAUTION!
Risk of Damage

Exposure to liquids may damage components or
accessories of wheelchair and electronics.

– DO NOT spray with any type of water or liquid.
– Electrical components damaged by corrosion

MUST be replaced immediately.

WARNING!
Risk of Injury, Damage or Death

Excessive moisture or cleaning may reduce the
flame retardancy of the upholstery and may
result in injury, damage or death.

– Follow all cleaning instructions.
– Avoid excessive moisture or cleaning.

Regular cleaning will reveal loose or worn parts and
enhance the smooth operation of your wheelchair.
To operate properly and safely, your wheelchair must
be cared for just like any other vehicle.

For upholstery that is severely stained or surface
finish that is badly damaged, contact Invacare for
further information.

Use the following instructions to clean this product
unless otherwise specified.

•

Upholstery — Warm water and mild non-abrasive
soap.

•

Metal — Hot water and mild non-abrasive soap.
Car polish and soft wax may be used to remove
abrasions and restore gloss.

•

Plastic — Hot water and mild non-abrasive soap.

Dry the surface with dry cloth.

DO NOT use solvents or kitchen cleaners.

9.5 Stability Lock

DANGER!
Risk of Death or Serious Injury

Not performing periodic maintenance on stability
lock could result in death or serious injury.

– ALWAYS perform the periodic maintenance

to the stability lock listed in the inspection
checklist of this manual.

60101831-A

Summary of Contents for TDXSP2

























































































Search results

Summary of Contents for TDXSP2

Reviews:

Related manuals for TDXSP2

Brands by name

Popular brands

Invacare TDXSP2, User Manual

Search results

Summary of Contents for TDXSP2

Reviews:

Related manuals for TDXSP2

Brands by name

Popular brands