manualshive.com logo in svg

Invacare Storm4 X-plore, User Manual

Share
Download
Invacare Storm4 X-plore User Manual Download Page 88

 

88 

9.11.2.3  Adjusting the seat depth with replacing the seat support plate 

Disassembly: 

• 

Remove the legrests. 

• 

Remove the armrests. 

• 

Remove the seat cushion. 

• 

Remove any cable ties which hold cables from the remote or lighting which have been fitted. 

Remove the cables from any clips which have been glued on. 

• 

Undo the cap nuts on the headlight holders with an 8 mm jaw spanner. 

• 

Place the headlights including their holders safely on the rear section of the battery box cover. 

• 

Remove the cover plates (1). 

• 

Undo the two Allen screws (9) at the front on the seat support plate and remove them. 

• 

Undo the two Allen screws (7) which are located on the side at the front of the seat support 

plate, and connect these to the crossmembers (4). 

• 

Undo the two Allen screws (8) which are located on the side at the rear of the seat support 

plate, and connect these to the crossmembers (4). 

• 

Remove the seat support plate (2). 

• 

Repeat these operations on the other side of the seat. 

• 

Undo and remove the two Allen screws (5) including washers. 

 

Assembly: 

• 

Pull the seat support to the required length so that the Allen screws (5) can be inserted in the 

holes in accordance with the table (see above). 

Summary of Contents for Storm4 X-plore





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands