Invacare Storm4 X-plore User Manual Download Page 174

Page: 174 / 180

174

14 Refurbishment

The product is suitable for refurbishment. Actions to be carried out:

•

Cleaning and disinfection. Please see chapter

Maintenance

on page

145

•

Inspection according to service plan. Please consult service instructions, available from
Invacare®.

•

Adaptation to the user. Please see chapter

Adjusting the wheelchair to the user's seating

posture

on page

15 Disposal

•

The equipment wrapping is potentially recyclable.

•

The metal parts are used for scrap metal recycling.

•

The plastic parts are used for plastic recycling.

•

Electric components and printed circuit boards are disposed of as electronic scrap.

•

Exhausted or damaged batteries can be returned to your medical equipment supplier or
Invacare®.

•

Disposal must be carried out in accordance with the respective national legal provisions.

•

Ask your city or district council for details of the local waste management companies.

Summary of Contents for Storm4 X-plore





















































































































































































Search results

Summary of Contents for Storm4 X-plore

Reviews:

Brands by name

Popular brands

Invacare Storm4 X-plore, User Manual

Search results

Summary of Contents for Storm4 X-plore

Reviews:

Brands by name

Popular brands