manualshive.com logo in svg

Invacare Storm4 X-plore, User Manual

Share
Download
Invacare Storm4 X-plore User Manual Download Page 159

 

159

 

13.2  Use of the wheelchair as a seat in a vehicle 

 

 

  Note 

The following section does not apply to models or configurations which may not be 
used as a vehicle seat. These are identified by the following labels on the lashing 
eyes: 

 

 

 

 

WARNING: Danger of death or serious injury to the wheelchair user and potentially any 
other nearby occupant of the vehicle, if a wheelchair is secured using a 4-point tie-down 
system available from a third party supplier and the unladen weight of the wheelchair 
exceeds the maximum weight for which the system is certified! 

• 

The actual weight of this wheelchair can exceed 140 kg! A suitably strong and proven 4-point 
tie-down system is available from Unwin Safety Systems! Please contact Unwin for more 
information on how to obtain such a system in your country! 
 
Unwin Safety Systems 
Phone: + 44 (0)1935 827740 
Email: [email protected] 
Web: www.unwin-safety.com 
 

• 

An alternative way to safely use this wheelchair as a vehicle seat may be by using the 
Docking Station system if the wheelchair is compatible with that system, available separately! 
Please contact Invacare if you require the details. 

 

 

Summary of Contents for Storm4 X-plore





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands