manualshive.com logo in svg

Invacare Storm4 X-plore, User Manual

Share
Download
Invacare Storm4 X-plore User Manual Download Page 35

 

35

 

4 

The position of the labels on the product 

 

1) Note: Remove the table before transporting 
 
2) Identification of the lashing eyes at the front 

and back 
Warning that the wheelchair may not be 
used as a vehicle seat 
Note on required head support if the 
wheelchair may be used as a vehicle seat 

 
3) Warning regarding the use of the lifter 
 
4) Identification of the position of the coupling 

lever for driving and push operation (only 
the right side is visible in the picture) 

 
5) Identification label sticker on the chassis at 

the rear right (also included in the pass 
card) 

 
6) Indication of the maximum width to which 

the armrest can be set 

 

The symbols on the labels are explained in section 

"Important symbols found on the vehicle

" on 

page 

15

. 

Summary of Contents for Storm4 X-plore





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands