Orion
5.
Loosen axle bolts (1) simultaneously on both sides.
6.
Pull front axle slowly out.
7.
Replace front axle.
8.
Replace parts in reverse order.
9.
Test function (trial run).
4.8.5 Replacing steering column
CAUTION!
Risk of accident
Accidental rolling can lead to accidents.
– Secure mobility device against rolling away.
When disassembling, note the position of small parts
such as screws and washers. Put small parts down so
that they can be reassembled in the right sequence.
•
10 mm wrench
•
17 mm wrench
•
19 mm wrench
•
32 mm wrench
•
Phillips screwdriver
•
Supporting wooden block
1.
Remove seat.
2.
Remove shroud.
3.
Disconnect battery cable.
4.
Place a supporting wooden block under the front part of
the frame so that front wheel is no longer touching floor.
Replacing steering column
1.
Remove drive lever screws
C
.
2.
Remove drive lever
B
.
3.
Loosen and remove screws
A
on operating console.
4.
Remove operating console.
5.
Remove screws
A
on rear steering column shroud.
6.
Remove steering column shroud.
7.
Loosen screws on front basket holder.
8.
Remove basket holder.
9.
Remove spacer bushes.
10. Disconnect cable from wiring harness.
22
1608032-A