Service
4.
Disconnect plug (4).
5.
Remove bolts (1) on rear shroud.
6.
Lift the rear shroud upwards.
7.
Remove screws (1) on brake light.
8.
Replace brake light.
9.
Install parts in reverse order.
10. Test functions (trial run).
4.7.4 Replacing rear lights/direction indicators
CAUTION!
Risk of burning if power cable is shorted
– Turn off power completely before removing any
power supply components of mobility device.
Therefore take out batteries.
– Avoid bridging of contacts during measurements
on live electrical components.
When disassembling, note the position of small parts
such as screws and washers. Put small parts down so
that they can be reassembled in the right sequence.
•
Phillips screwdriver
1.
Remove seat.
2.
Remove shroud.
3.
Disconnect battery cable
A
.
4.
Remove bolts (1) on rear shroud.
5.
Lift rear shroud upwards.
6.
Remove screws (1) on rear light.
7.
Remove rear light.
8.
Remove screws (1) on glass.
1608032-A
19