Service
1.
Press key to change settings.
2.
Save settings by waiting for 10 seconds or pressing any
other keys except keys above.
4.6 Shrouds
4.6.1 Removing shroud
CAUTION!
Risk of damage to shroud
– Do not pull shroud straight up to remove.
– Follow instructions below.
1.
Place one hand at the front, the other at the rear of
the shroud
A
.
2.
Lift shroud up from front.
3.
Place hands on left and right side of shroud.
4.
Twist and lift to remove shroud completely.
4.6.2 Replacing front shroud
•
10 mm socket wrench
•
Phillips screwdriver
1.
Remove shroud. See 4.6.1 Removing shroud, page 17.
2.
Remove four caps
A
.
3.
Loosen and remove screws
B
.
4.
Take off front shroud.
5.
Install parts in reverse order.
4.7 Lighting unit
4.7.1 Replacing headlight
•
Phillips screwdriver
1.
Remove seat.
2.
Remove shroud.
3.
Disconnect battery cable
A
.
4.
Remove screw (1) or
A
on headlight under front shroud.
5.
Remove headlight.
6.
Disconnect cable from wiring harness.
7.
Remove screws (1) on headlight glass.
8.
Remove headlight glass.
9.
Replace bulb(s) in headlight.
10. Test function.
4.7.2 Replacing front direction indicators
•
Phillips screwdriver
1608032-A
17