Invacare Motion Concepts Ultra Low Maxx, Service Manual Supplement, Page: 63 / 100

Legrests
Lowering Pivot Plus legrest
1. Unlock manual legrest lever A .
2. Lower legrest to desired angle.
3. Lock manual legrest lever.
10.1.4 Adjusting Width- and Angle-Adjustable
Footplate
Tools:
• 6 mm Allen key
• 10 mm wrench
Adjusting the Width
Fig. 10-3
1. Loosen the clamping block
A
to adjust the entire
footplate position (width) in and out along the pivot
post
B
.
Adjusting the Angle
The footplate angle can also be adjusted via the setscrew
on the inside of the footplate bracket.
Fig. 10-4
1. Tighten or loosen the set screw A to increase or
decrease the footplate angle accordingly.
10.1.5 Replacing Actuator of Powered Pivot
Plus Legrest
• 5 mm Allen key
• 10 mm wrench
Fig. 10-5
1. Turn off power wheelchair.
2. Unplug actuator at phono connector directly under
seat plate.
3. Remove screws, washers and nuts at top A and
bottom
B
of actuator.
Note position and number of washers to make
re-inserting easier.
4. Replace actuator with new one.
Fig. 10-6
Actuator lead A must face forward.
5. Re-insert screws, washers and nuts and tighten.
6. Plug actuator into phono connector.
7. Turn on power wheelchair and test correct function
of legrest.
10.1.6 Replacing Pivot Plus Calf Pad Assembly
A
B
C
D
E
F G
H
Fig. 10-7
1586649-F 63