Invacare microAIR MA90 Series, Owner'S Operator And Maintenance Manual

Page: 18 / 28

SECTION 2—OPERATION
MA90 Series
18
Part No 1148139
Mode Button (MA90Z)
1. Press the Mode button ( ) to select the Max Inflate Mode or the Low Air Loss mode.
• Max Inflate Mode ‐ In this mode, the mattress inflates rapidly to maximum
firmness (pressurized to 35 ± 6 mmHg). A series of beeps sound every three
minutes as a reminder that the Max Inflate mode is active. After 30 minutes, the
Max Inflate mode deactivates and the control unit defaults to the previous setting.
NOTE: It takes 5 ‐ 10 minutes for the MA90Z mattress to inflate fully (inflation time depends
on size of mattress).
NOTE: Max Inflate mode can be manually disengaged by pressing the Max Inflate button.
This will deactivate the Max Inflate LED.
NOTE: It is recommended that Max Inflate setting be used during patient ingress/egress,
patient wound care, patient turning or patient cleaning.
• Low Air Loss Mode ‐ In this mode, the mattress goes into on ‐ demand low air loss
relief mode.
Max Inflate Button (MA95Z)
1. Press the Max Inflate button ( ) to select the max inflate mode and inflate the
mattress rapidly to maximum firmness (pressurized to 35 ± 6 mmHg). A series of
beeps sound every three minutes as a reminder that the Max Inflate mode is active.
After 30 minutes, the Max Inflate mode deactivates and the control unit defaults to the
previous setting.
NOTE: It takes 25 ‐ 60 seconds for the MA95Z mattress to inflate fully (inflation time depends on
size of mattress).
NOTE: It is recommended that Max Inflate setting be used during patient ingress/egress, patient
wound care, patient turning or patient cleaning.
2. Perform one of the following:
• MA90Z ‐ Press the Max Inflate button again to manually disengage Max Inflate
mode.
• MA95Z ‐ Select a different setting to exit Max Inflate mode.
NOTE: This will deactivate the Max Inflate LED.