SECTION 2—OPERATION
Part No 1148139
13
MA90 Series
FIGURE 2.3
Connecting the Hose
Connecting the Power Cord
WARNING
DO NOT alter plug to fit a non-conforming outlet. Instead, have an electrician
install a properly grounded outlet. Failure to use the correct plug and outlet can
result in a potential safety hazard.
CAUTION
Ensure that the power cord of the control unit is not pinched, or has any objects placed
on it, and also ensure it is not located where it can be stepped on or tripped over.
1. Examine
the
hospital
grade
power
cord
supplied
with
the
control
unit.
2. Perform
one
of
the
following:
• If
the
plug
is
damaged
‐
Call
your
supplier
for
a
replacement
hospital
grade
cord.
• If
the
plug
is
not
damaged
‐
Plug
the
end
of
the
supplied
hospital
grade
power
cord
into
the
power
outlet
on
the
side
of
the
control
unit.
3. Plug
the
other
end
of
the
plug
into
a
properly
grounded
outlet
on
the
wall.
NOTE:
Once
the
unit
is
plugged
in,
an
AMBER
LED
on
the
control
unit
is
lit
indicating
that
the
system
is
in
STAND
BY
mode.
Connector
Cover
Control Unit
Connectors
MA95Z Hose
Connector
DETAIL “A” - MA90Z
CONNECTOR
Control
Unit
DETAIL “B” - MA95Z
CONNECTOR
MA90Z Hose
Connector
Tab
