Invacare LiNX DLX-REM400, User Manual, Page: 13 / 128

Components
Speedometer displays standstill.
While driving, the speedometer displays the
wheelchair’s current speed.
The odometer displays the distance travelled
by the wheelchair since it was last reset to
zero or rolled over to zero.
The odometer can display up to a maximum
distance of 9999 km or miles, after which
it rolls over to zero.
At any time the odometer can be reset back
to zero, see
5.2.5 Configuring Odometer,
page 30 .
The function information displays either the latched driving
mode, see
5.9 Latched driving mode, page 50 or the Gyro
indication, see table below.
no symbol No Gyro is connected to the system or
enabled for drive function.
Gyro disabled.
Gyro enabled.
Seating Card
Fig. 3-6
Seating cards are for operating the seating functions, see
5.19.1 Through Seating Cards, page 67 .
Connectivity Card
Fig. 3-7 Mouse Mover function
Fig. 3-8 Switch Control function
Connectivity cards allow you to communicate with external
devices. The connectivity functions that are supported by
1637423-H 13