Invacare
®
- Kite
SERVICE MANUAL
37
•
Disconnect the plugs (1) from the power module (3) and from the actuator module (4).
•
Use the 8 mm socket wrench to loosen both nuts (2).
•
Pull the actuator module with the holder towards the rear and off of the guides.
•
Pull the power module towards the rear and off of the guides.
•
Replace the power module.
Installing the power module:
•
Assemble the parts in reverse order.
•
Reconnect all cable connectors to their former positions.
•
Plug all free slots with a suitable rubber stopper, see chapter 4.2.
•
Select the driving program, as described in chapter 8.2.6.
•
Update the driving program if a new software version is available, as described in chapter 8.3.
•
Modify the driving program using the programming software as needed.
•
The last step is to test all functions of the vehicle.