SERVICE MANUAL
Invacare
®
- Kite
114
•
Remove the backrest cushion.
•
Loosen the straps of the sling backrest or remove the Flex3 backrest.
•
Loosen and remove both screws (5) of the actuator fixation bracket.
•
Remove the cover of the actuator fixation bracket.
•
Loosen and remove the screws and nuts (2, 4) on the upper and lower actuator fixation bracket
on both sides.
•
Adjust the backrest fixation (6) for the new backrest width according to the table on page 113.
•
Insert the screws (2) through the cover of the actuator fixation bracket and the corresponding
holes of the backrest fixation to the actuator fixation.
•
Fasten these with the nuts (4).
•
Reposition the cover of the actuator fixation bracket.
•
Insert and tighten the screws (5) again.
•
Adjust the straps of the sling backrest to the new width or install the adjusted Flex 3 backrest.
•
Install the backrest cushion.
•
Perform a function check of the chair.
