manualshive.com logo in svg

Invacare FDX, User Manual, Page: 4 / 120

Share
Download
Invacare FDX User Manual Download Page 4

5.8 Adjusting the seat angle . . . . . . . . . . . . . . . . . . . . . . . . . 42

5.8.1 Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.9 Adjusting Backrest. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.9.1 Adjusting the backrest (standard seat) — manually

with splint-pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.9.2 Adjusting the back seat angle on the Easy-Adapt

seating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

5.9.3 Adjusting Backrest Height. . . . . . . . . . . . . . . . . . . . . . 44
5.9.4 Adjusting Backrest Width . . . . . . . . . . . . . . . . . . . . . . 44
5.9.5 Adjusting Backrest Angle . . . . . . . . . . . . . . . . . . . . . . 45
5.9.6 Adjusting the adaptable backrest padding. . . . . . . . . . 46

5.10 Adjusting Rea Headrest . . . . . . . . . . . . . . . . . . . . . . . . . 48

5.10.1 Adjusting Position of Rea Headrest or Neckrest. . . . . 48
5.10.2 Adjusting Height of Rea Headrest or Neckrest . . . . . . 48
5.10.3 Adjusting Cheek Supports . . . . . . . . . . . . . . . . . . . . . 49

5.11 Adjusting Elan Headrest. . . . . . . . . . . . . . . . . . . . . . . . . 49

5.11.1 Adjusting Elan Headrest Hardware . . . . . . . . . . . . . . 50

5.12 Adjusting the trunk support (Easy-Adapt seating

system). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.12.1 Adjusting the width . . . . . . . . . . . . . . . . . . . . . . . . . 52
5.12.2 Adjusting the height. . . . . . . . . . . . . . . . . . . . . . . . . 52
5.12.3 Adjusting the depth . . . . . . . . . . . . . . . . . . . . . . . . . 52

5.13 Adjusting/Removing Tray . . . . . . . . . . . . . . . . . . . . . . . . 53

5.13.1 Adjusting Tray Laterally. . . . . . . . . . . . . . . . . . . . . . . 53
5.13.2 Adjusting Depth of Tray/Removing Tray. . . . . . . . . . . 53
5.13.3 Swinging Tray Away to Side . . . . . . . . . . . . . . . . . . . 53

5.14 Seat support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

5.14.1 Adjusting seat width. . . . . . . . . . . . . . . . . . . . . . . . . 54
5.14.2 Adjusting the seat depth . . . . . . . . . . . . . . . . . . . . . 55
5.14.3 Adjusting the seat depth without replacing the

seat support plate . . . . . . . . . . . . . . . . . . . . . . . . . . 56

5.14.4 Adjusting the seat depth with replacing the seat

support plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

5.15 Backrest unit with ergonomic length compensation

(Easy-Adapt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

5.15.1 Adjusting the width . . . . . . . . . . . . . . . . . . . . . . . . . 58

5.16 Center-mounted legrests — manually adjustable . . . . . . 58

5.16.1 Removing the legrest . . . . . . . . . . . . . . . . . . . . . . . . 58
5.16.2 Setting the angle of the leg rest . . . . . . . . . . . . . . . . 59
5.16.3 Setting Length of Legrest . . . . . . . . . . . . . . . . . . . . . 59
5.16.4 Setting Angle of Foot Plate . . . . . . . . . . . . . . . . . . . . 60
5.16.5 Setting Angle and Height of Calf Pad . . . . . . . . . . . . 60

5.17 LNX legrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

5.17.1 Setting the length of the legrest . . . . . . . . . . . . . . . . 60
5.17.2 Setting Angle of Foot Plate . . . . . . . . . . . . . . . . . . . . 61
5.17.3 Setting Height and Width of Calf Pad . . . . . . . . . . . . 61

5.18 Vari-F footrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

5.18.1 Swivelling the footrest/legrest outward and/or

removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

5.18.2 Setting the angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
5.18.3 Setting the end stop of the footrest . . . . . . . . . . . . 63
5.18.4 Adjusting the length of the footrest . . . . . . . . . . . . . 65

5.19 Vari-A legrests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

5.19.1 Swivelling the footrest/legrest outward and/or

removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

5.19.2 Setting the angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
5.19.3 Setting the end stop of the legrest . . . . . . . . . . . . . . 67
5.19.4 Adjusting the length of the legrest . . . . . . . . . . . . . . 69
5.19.5 Adjusting the depth of the calf pad . . . . . . . . . . . . . 69
5.19.6 Adjusting the height of the calf pad . . . . . . . . . . . . . 70
5.19.7 Unlocking and swivelling the calf pad backward

when alighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

5.19.8 Adjusting the angle–adjustable foot plate . . . . . . . . . 71
5.19.9 Adjusting the angle– and depth–adjustable foot

plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

5.20 ADM legrests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

5.20.1 Swivelling the legrest outward and/or removing . . . . 72
5.20.2 Setting the angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
5.20.3 Adjusting the length of the legrest . . . . . . . . . . . . . . 73
5.20.4 Adjusting the depth of the calf pad . . . . . . . . . . . . . 73
5.20.5 Adjusting the height of the calf pad . . . . . . . . . . . . . 74

Summary of Contents for FDX

























































































































Reviews:

No comments