The safety belt installed in the transporting vehicle should
be applied as shown in the illustration above.
1) Center line of the body
2) Center of the sternum
8.4 Transporting the mobility device without
occupant
CAUTION!
Risk of injury
– If you are unable to fasten your mobility
device securely in a transport vehicle, Invacare
recommends that you do not transport it.
Your mobility device may be transported without restrictions,
whether by road, rail or by air. Individual transport
companies have, however, guidelines which can possibly
restrict or forbid certain transport procedures. Please ask
the transport company regarding each individual case.
•
Before transporting your mobility device, make sure the
motors are engaged and that the remote is switched off.
Invacare strongly recommends that you additionally
disconnect or remove the batteries. Refer to Removing
the batteries.
•
Invacare strongly recommends securing the mobility
device to the floor of the transporting vehicle.
8.4.1 Removing the front shroud
Removing the front shroud:
1.
Remove legrest hangers.
2.
Loosen and remove two thumb screws (2).
3.
Slide front shroud (1) up a little and pull shroud forward
to remove it.
Replacing the front shroud:
1.
Replace parts in reverse order.
2.
Replace plastic shroud in such a way that recesses on
side (3) and lower hooks of shroud hook into chassis (4).
3.
Tighten two thumb screws (2) by hand.
1541361-N
97