Azalea®
CAUTION!
Risk of discomfort for the user
The low pivot point causes shearing when the back is
reclined, this might result in discomfort for the user.
–
Make sure that the user is well positioned after each
adjustment.
3.12
Foot box
WARNING!
Risk of injury
–
When using the foot box, the settings and adjustments
of the accessory and the wheelchair, must always be
performed by an authorized personnel or competent
person with knowledge of seating and positioning.
WARNING!
Risk of injury
The user might fall when getting in and out of the chair.
–
When using the foot box, it is recommended to use a
lifter.
WARNING!
Risk of injury and/or damage to the product
–
Hold the foot box to secure it before releasing the
levers, otherwise it will fall down.
The foot box should not be removed from the wheelchair
during use, unless it needs to be replaced.
The adjustment of the foot box must be carried out by two
persons.
Position adjustment
A
A
B
1.
Press the release handles
A
.
2.
Adjust the position of the foot box
B
.
3.
Let go of the release handles
A
.
Make sure that the foot box is locked in position.
Angle adjustment
C
C
D
E
1.
Loosen the nuts
C
.
2.
Adjust the foot box
D
to the desired angle.
3.
Re-tighten the nuts
C
.
Fixate the screw with the allen key
E
and loosen the nut
with the spanner
C
.
10 mm fixed s 4 mm allen key
3.13
Rear wheels
A
B
C
1.
Push the quick-release button
A
.
2.
Pull the rear wheel straight out and remove the wheel and the
rear wheel axle
B
from the rear wheel attachment
C
.
3.13.1
Adjustment rear wheels 16 inch
WARNING!
Safety risk
–
When you have fitted the wheels in the correct
position, it is important that you check thoroughly that
the nuts and screws are tightened securely. This is
important for your own safety!
CAUTION!
Risk of tipping
When accessories are mounted on the back of the
wheelchair the tip risk increases.
–
When accessories are mounted on the back of the
wheelchair, the rear position should be used.
The 16" transit wheel
A
can be placed in three different
positions. The middle position is the standard position.
24
1580313-B
