Setup
3.
Fig. 4-4
Place the seat
B
on the bottom of the empty bathtub.
Ensure that the spindle foot retainer
C
is pointing
towards the end of the bathtub opposite the drain
A
.
4.
Fig. 4-5
Fold the side flaps of the seat outwards.
5.
Fig. 4-6
Place the backrest
A
(without the hand control) onto
the seat so that the hooks
B
of the backrest fit into the
hinges
C
of the seat plate
D
.
6.
Risk of Damage
Damage to the product caused by the spindle
foot slipping out.
– Make sure that the spindle is fully retracted
and the spindle foot is level and not
twisted, before folding up the backrest.
– Once the backrest is folded up, ensure
that the spindle foot is in the spindle foot
retainer.
1574470-E
13
