Aquatec® R / F / XL
D
Tub width
(outside)
580 - 690 mm (with special side flaps)
700 - 740 mm (with standard side
flaps)
750 - 1000 mm (with special side
flaps)
E
Tub height
(inside)
≤ 420 mm
(with height adapter, max. + 60 mm)
Risk of Damage
– Ensure that the suction cups are mounted
properly.
– Ensure that the battery in the hand control is
charged.
– When lifting bath lift components, remember
to correctly assess the weights, refer to
10.1
Dimensions and weight, page 27
.
– If a handrail is mounted at the inside of the
bathtub, use the side flap diverters (available
as an accessory).
– Fold the side flaps outwards before folding up
the backrest.
1.
Fig. 4-2
Put rear suction cup with threaded bolt
A
on sleeve
nut
B
and screw it in.
Screw as far as the suction cup fits the orientation on
the graphic.
2.
Fig. 4-3
Put toggle
A
through keyhole bore
C
and place it in
the corresponding recess.
Feed head of suction cup
B
through bore
C
and pull
the suction cup forwards.
Fix suction cup with red lid
D
.
12
1574470-E
