Setup
4 Setup
4.1 Safety Information
Risk of Damage
– Check all parts for transport damage and check
before usage. Contact your provider if required.
– Ensure during assembly that the parts are
positioned correctly with respect to one
another.
– It is recommended to wash the covers before
first use, refer to
7.2 Cleaning and Disinfection,
page 21
.
4.2 Setting up Bath Lift
WARNING!
Risk of Slipping
The bath lift can slip if the suction cups do not
have a proper hold.
– Clean the bathtub and the suction cups with a
damp cloth before setting up the bath lift.
– Do not change the position of the bath lift in
the bathtub once it is set up.
WARNING!
Risk of Injury and Damage!
– Only set up the bath lift in bathtubs that
comply with the specifications of the following
table.
– If a lateral overflow is present in the bathtub,
use the special side flaps (available as an
accessory).
A
B
C
E
D
80 mm
Fig. 4-1
A
Tub length,
bottom
≥ 800 mm
B
Tub width,
bottom
(inside)
≥ 280 mm
C
Tub width, at
80 mm height
(inside)
≥ 430 mm
1574470-E
11
