background image

16

17

 

The castor

 consists of the front wheel and the fork.  The 

castors provide front contact with the ground and determine 
the steering by the direction of the forks.

 

The manual brake

 is a parking brake.  The two manual 

brakes are used to secure the wheelchair when stationary.

2. 

Adjustments

2.1. Seat

2.1.1 Seat upholstery
- Standard seats
• Nylon upholstery seat with or without Velcro fastener : the 

Velcro fasteners are required for the proper positioning of 

the cushion (photo 1) ; please make sure that the cushion is 

properly positioned on the seat. 
• Padded seat : it provides comfortable support to the user.

 

i

 

Standard seats are not adjustable; in the event that they 

become slack, it is recommended to request your dealer to 

replace them.

!

 Always use upholstery equipped with Velcro fasteners 

when you have a cushion in order to prevent sliding. Adding 
a cushion to the seat will raise your height above the ground 
and can affect your stability in all directions. If a cushion is 
changed it may also change the users stability.

 

i

 

Invacare provides a wide range of seat cushions adap-

ted to your needs.  Please contact your dealer.

Seat

upholstery

Armrest

Backrest upholstery

Backrest

Footplate

Swing away 

legrest

Folding 

frame

Steering tube

Rear wheel

Rear wheel axle

Handrim

Manual 

brake

Front wheel

Armpad

Adjustable

footrest tube

Rear wheel 

support

Swing away 

footrest

1

Summary of Contents for Action 4





































Reviews: