18
19
i
In the event that the upholstered backrest slackens, ask
for a replacement from your Dealer.
• Contour (Tension) adjustable backrest (photo 8) contour
allows adjustment of the backrest curvature based upon user’s
body posture, to provide the best comfort as possible.
!
Before making adjustments please ensure that the wheel
chair is fully opened, the seat rails are properly located and a
back brace (C) is perfectly fitted on the chair (see instructions
paragraph 2.6.1)
Lift the flap (A) and pull the straps (B) in order to stretch or
slacken them. Each strap can be adjusted separately.
Reposition the flap (A).
!
Check the quality and positioning of the Velcro fasteners.
Always make this adjustment before the user settles down in
the wheelchair to prevent injuries !
Before making adjustments please ensure that the wheelchairs
is fully opened. These adjustments is to curved the backrest
upholstery don’t make it flat, it will be uncomfortable for the
user.
2.1.4 Footrest supports
- Standard footrest supports (photo 9) they swing away du-
ring transfers and can be removed during transport.
Operate lever (A) by pushing sideways and swivelling towards
outside or inside in case there is not enough space. To re-
turn to the initial position, align the footrest support it locks
automatically.
To remove the footrest support, simply pull up after
unlocking the assembly. Reverse the procedure to reassem-
ble, while still in the unlocked position.
- Legrest (photos 10 & 11) performs the same operation as
for the footrest support to swing away or remove the legrest,
by operating lever (A) which unlocks the locking system.
To adjust the angle, pull the lever (B) with one hand while
supporting the legrest with your other hand. When a suitable
angle is obtained, let go of the lever and the legrest will look
into one of seven preset positions (schema 10 A).
The calfpad swings away during transfers and is height
A
9
A
10
10A
C
D
A
B
11
