background image

6

7

- Method 2 (figure 12)

In this case, the attendant stays on the pavement and tilts 

the wheelchair in a backwards position with the rear wheels 

against the kerb.  The attendant tilts the wheelchair bac-

kwards until it is balanced and pulls the wheelchair with a 

steady movement until the rear wheels climb over the kerb ; 

then he / she lowers the castors, while making sure that the 

chair is far enough on the pavement so that the castors do 

not fall into empty space.

To get off the pavement :

The attendant positions the wheelchair facing forward on 

the pavement and tilts it backwards until it is balanced, then 

he/she pushes the wheelchair forward until the rear wheels 

touch the road after getting over the obstacle; then, he / she 

gradually lowers the castors to the ground.

1.5. Stairways

Because this is a difficult movement, we recommend using 

two attendants, one in front of the wheelchair and one 

behind the wheelchair.

!

Warning :

we recommend that users over 100 kg in weight do not use 

this starway manoeuvre !

To climb stairways (figure 13) :

After tilting the wheelchair to the point of equilibrium, one 

assistant (at the back) holds the wheelchair up against the 

first step grasping the handles firmly to lift..

The second assistant, lifts the wheelchair above the stairs, 

while holding firmly a fixed part of the frame, and holds it 

while the first assistant takes a step and repeats the opera-

tion. The wheelchair must not be lowered until the last step 

has been passed and the chair is clear of the stairs.

To descend stairways :

Same operation as above, however, reverse steps as above.

!

Warning :

- Do not attempt to lift the wheelchair by any removable parts 
(such as armrests, legrests or footrests).

- Avoid using an escalator which may lead to serious injury in 

the event of a fall.

13

14

12

Summary of Contents for Action 4





































Reviews: