Section 2:
Configuration
Revision 1.0a
17
© 2006 Intuicom, Inc.
Figure 2-12: Hop Table Parameters
Hop Table Version
allows the user to choose the portion of the band in which the
transceiver will operate. These choices are show in the table below:
Selection
Name
Band
0
Standard
Full 902-928 MHz
1 Australia 915-928
MHz
2
International
902-928 MHz, 16 fewer frequencies
than full US set
3 Taiwan 916-920
MHz
4
New Zealand 921-928 MHz
5
Notch
Uses 902-928 with center frequencies
of 911-919 notched out
6 Brazil 902-915
MHz
Table 2-2: Frequency Bands 900 Mhz
Note: Do NOT use Freq Key 14 (D) with the Australia (915-928MHz) hop table
Hop Table Size
allows the user to select, within a specified band, the number of
frequencies to be used ranging from 50 to 112.
Hop Freq Offset
is not functional in the 900 MHz spread spectrum transceiver.
