Instruction for Use
USER MANUAL
IBT-QMS-TF-001 (R00)
19/34
1. User interface home screen
The start-up screen page is showed up on touchscreen and initializes the sensors after switching on the
instrument.
Figure 9. Initializing screen window
If everything is completed and has no problems, then main home screen will be appeared as below.
Figure 10. Home screen window
2. Plate set up (example, 96 plate well type)
The exclusive 96 well plate must be set by following the instructions
1
Open the front door and pull the heating tray to set 96 well plate for test
Warring
Risk of injury and material damage
Be cautious not to get finger caught between the door and the heating tray
when pulling/pushing heating tray. Excessive force applied may damage
user's finger and the instrument. Open the door slowly. Otherwise, it may
damage the instrument.
2
Insert the plate on the hole of heating plate
Summary of Contents for Miracle-AutoXT
