Commissioning and operation
INTORQ | BA 14.0214 | 10/2019
45
Fig. 25:
Turning direction of the lever
DANGER
Danger: rotating parts!
The motor must
not
be running when checking the hand-release.
1. Hang the Bowden cable (not included in the scope of delivery) and tighten it using the torque required
for that size (750 to 1100 newtons for size 17 to size 28).
- The drive must be able to turn freely. A low residual torque is permitted.
2. Release the lever.
- A torque must now be built up!
7.2
Commissioning
1. Switch on drive system.
2. Carry out a braking test.
