Mechanical installation
INTORQ | BA 14.0217 | 09/2019
46
Fig. 17:
Mounting the complete stator
A
Socket head cap screw
B
Stator, complete
C
Terminal clip
D
Rotor
E
End shield
3. Screw the complete stator to the end shield Use the supplied screw set and a torque wrench (for tight-
ening torque, refer to the table Rated data: screw kit for brake assembly on separately screwed-on
flange, Page 25 ).
4. Remove the terminal clips and dispose of properly.
Fig. 18:
Tightening the screws with a torque wrench
