95663 3 03/22
GB
23
16.99 SmartShred
5 .5 16 .99 with discharge conveyor:
Automatic stop in case of full
conveyor belt housing
The machine switches off automatically when paper jams in
the conveyor belt housing (fig. 15/1). Then proceed as fol-
lows to empty the housing:
000419
1
1
Conveyor belt with housing
fig. 15 Shredder back
5 .6 16 .99 with discharge conveyor: Em-
ptying the conveyor belt housing
A specific pop-up windows containing error messages ap-
pears on the display.
If this is the case, switch the machine off at the main switch
(fig. 7/2), lift up the cover flap (fig. 16/3) and remove the ma-
terial from the housing by hand. Grasp the housing in both
directions. Then you can switch the machine on again and
continue shredding.
1
2
3
000418
1
Conveyor belt housing
2
Handle
3
Cover flap
fig. 16 Emptying the conveyor belt housing
NOTE!
The machine can only be started when the cover
flap (fig. 16/3) is closed.
5 .7 Automatic lubrication system
See enclosed instructions (item no. 94658) for automatic lu-
brication system.
6 Baler operation
6 .1 Using the baler
The strap brake (fig. 17) must be closed (move lever to right).
000207
1
1
1
Strap brake
fig. 17 Strap brake
NOTE!
If baling is to be performed without subsequent ty-
ing off, refer to ”
C) Eject into plastic sack without
tying off
”.
6 .2 Feeding the baler via the shred-
der
When the baling chamber and the inlet funnel are filled with
material from the shredder, the compacting cycle is started:
The baling ram (fig. 14/1) advances, compacts the material
and then returns to home position. The shredder may be fed
while the baler is compacting.