95663 3 03/22
GB
19
16.99 SmartShred
DANGER!
Risk of death by electrocution!
Correcting the phase relation at the control box
may only be carried out by a qualified electrici-
an!
3 .4 Initial commissioning
Switch on, set the language and time. See
„Display“, p. 19.
4 Controls
4 .1 Switches and Keys
3
1
4
5
2
6
000119
1
Key selector switch
2
Main switch (emergency stop)
3
Start button, green
4
Reset button, yellow
5
Stop button, red
6
Display
fig. 7 Controls
1
= Key selector switch
a) Left: manual operation
The „Manual operation“ screen appears. Manual con-
trol of the machine via the display.
b) Middle: lock
The machine can be locked and thus secured against
unauthorised use. When the main switch is on, the
start screen appears.
c) Right: automatic mode
The “Automatic mode” screen appears.
2
= Main switch (emergency stop)
This switch is used to switch the machine on and off
(position “1” or “0”).
3
= Start button, green
Only in automatic mode:
When this button is pressed, the shredder‘s cutting me-
chanism and conveyor belt start running and the ma-
chine can be loaded.
4
= Reset button, yellow
Only in automatic mode:
Press the button as instructed on the display.
5
= Stop button, red
Only in automatic mode:
When this button is pressed, the shredder is switched
off and the cutting mechanism and conveyor belt are
stopped.
6
= Display
All other information is entered and output via the dis-
play (settings, control, status messages, error messages).
NOTE!
To avoid display damages from scratches and
cracks put tools and the like out of your hand be-
fore operating.
4 .2 Display
Four main screens (fig. 7/6) are used to control the machine.
NOTE!
The display contains various buttons, fields and il-
luminated displays:
Circular: illuminated information display
Rectangular: text output field
Rectangular with 3D effect: input button