![background image](http://html1.mh-extra.com/html/intex/wl3110/wl3110_owners-manual_2081381005.webp)
155
PO
SAVE THESE INSTRUCTIONS
Page 5
(155PO) POOL LIGHT ENGLISH 7.5” X 10.3” PANTONE 295U 11/21/2009
English
SS
EE
TT
UU
PP
II
NN
SS
TT
RR
UU
CC
TT
IIOO
NN
SS
SETUP INSTRUCTIONS
This product is specially designed for above ground pool. The LED pool-wall light
uses magnetic technology to create a light system that safety generates low
voltage current through the pool’s sidewall to a powerful LED light inside the pool.
IMPORTANT
• This product is for use with above ground pool wall with a thickness
of 1mm (0.04 in) or less.
• Do not use this product as a free stand alone light.
1.
Separate the pool light
(1)
from the transmitter
(2)
by hand through the side
opening groove.
See drawing (1 & 2)
.
CAUTION:
To avoid finger pinch or injury, always separate the pool light from
the transmitter through the side opening groove.
2.
Place the transmitter
(2)
on the outside of the pool wall and the pool light
(1)
on the inside of the pool wall submerged in water. Ensure the transmitter
magnetic poles are properly aligned with the magnetic poles on the pool light
unit.
See drawing (3)
.
1
2
WARNING
• Always unplug this product from the electrical outlet before removing,
cleaning, servicing or making any adjustment to the product.
• Do not operate the product if housing is cracked or showing water
leakage; remove from pool or water immediately.
3