background image

263

PO

S  AVE THESE INSTRUCTIONS

(263PO)  SPA  ENGLISH  7.5” X 10.3”  PANTONE 295U  07/16/2014

English

When ordering parts, be sure to quote the model number and part numbers.

PARTS (continued)

Before assembling your product, please take a few minutes to check the contents 

and become familiar with all the parts.

Page 6

REF. NO.

DESCRIPTION

QTY.

      PART NO.

1

 CONTROL BASE

1

11931

2

 CONTROL BASE BACK COVER

1

11719

3

 CONTROL PANEL (INCLUDED #4 )

1

11930

4

 CONTROL PANEL BOLT 

3

11024

5

 CONTROL BASE INFLATION CAP

1

11831

6

 CONTROL PANEL BOLT WRENCH 

1

11053

7

 SPA/COVER INFLATION HOSE  

1

11830

8

 SPA CONTROL INLET/OUTLET O-RING

2

11699

9

 SPA CONTROL AIR INLET O-RING

1

11687

10

 SPA DRAIN PLUG

1

11696

11

 SPA DRAIN VALVE ADAPTOR

1

11713

12

 FILTER CARTRIDGE HOUSING

2

11798

13

 FILTER CARTRIDGE

2

11692

14

 FILTER CARTRIDGE HOUSING LID

2

11797

15

 INLET/OUTLET PLUG

3

11739

16

 SPA TUB

1

11879

17

 SPA COVER

1

11878

18

 SPA COVER INFLATABLE BLADDER (PRE-INSTALLED IN SPA COVER) 

1

11884

19

 GROUND CLOTH

1

11933

20

 CHEMICAL DISPENSER

1

11614

21

 TEST STRIPS

1

11855

22

 WRENCH

1

11742

23

 PRESSURE GAUGE

1

11741

24

 SUCTION FITTING

3

11695

25

 INFLATION HOSE ADAPTOR

1

11829

26

 MALE BUCKLE

8

11698

27

 FEMALE BUCKLE

8

11799

28

 DEFLATION OUTLET CAP

1

11934

29

 DEFLATION HOSE ADAPTOR

1

11935

30

 SPA FILTER MOTOR

1

11885

SPA SUCTION FITTING

Self-contained spa 

fi

 ttings. – For multiple outlet use only. – Wall mounting only.

Replace suction 

fi

 ttings within 3 installed year. – Tool required: screwdriver.

Spa suction 

fi

 tting maximum 

fl

 ow rate: 8.5 gpm (510 gph) 

• 

Check suction strainer 

fi

 tting and fasteners for damage or tampering before each use of the spa.

• 

For service and winterization instructions refer to “Maintenance” and “Storage” sections.

• 

Read and follow all instructions, save these instructions for future reference.

Summary of Contents for PureSpa SSP-H-10-1





















Reviews: