background image

(178)  MODEL SF10110 SAND FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  07/08/2012

178

    

SAVE THESE INSTRUCTIONS

Page 27

English

LIMITED WARRANTY

Your Sand Filter Pump has been manufactured using the highest quality materials and   

workmanship. All Intex products have been inspected and found free of defects prior to   

leaving the factory. This Limited Warranty applies only to the Sand Filter Pump and 

accessories listed below.

The provisions of this Limited Warranty apply only to the original purchaser and is not    

transferable. This Limited Warranty is valid for the period noted below from the date of the 

initial retail purchase. Keep your original sales receipt with this manual, as proof of purchase 

will be required and must accompany warranty claims or the Limited Warranty is invalid.

     Sand Filter Pump Warranty – 2 Years   

     Hoses, Plunger Valves & Fittings Warranty – 180 days 

  

If a manufacturing defect is found within the periods noted above, please contact the 

appropriate Intex Service Center listed in the separate “Authorized Service Centers” sheet. 

The Service Center will determine the validity of the claim. If the Service Center directs you 

to return the product, please carefully package the product and send with shipping and 

insurance prepaid to the Service Center. Upon receipt of the returned product, the Intex 

Service Center will inspect the item and determine the validity of the claim. If the provisions 

of this warranty cover the item, the item will be repaired or replaced at no charge.  
Any and all disputes regarding the provisions of this Limited Warranty shall be brought before 

an informal dispute settlement board and unless and until the provisions of these paragraphs 

are carried forth, no civil action may be instituted. The methods and procedures of this 

settlement board shall be subject to the rules and regulations set forth by the Federal Trade 

Commission (F.T.C.). IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS 

WARRANTY AND IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR 

EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR 

CONSEQUENTIAL DAMAGES OR LIABILITIES. Some states, or jurisdictions do not allow 

the exclusion or limitation of incidental or consequential damages, so the above limitation or 

exclusion may not apply to you. 

 

This Limited Warranty does not apply if the products are subject to negligence, abnormal use 

or operation, accident, improper operation, improper voltage or current contrary to operating 

instructions, or to damage by circumstances beyond Intex’s control, including but not limited 

to, ordinary wear and tear and damage caused by exposure to fire, flood, freezing, rain, or 

other external environmental forces. This Limited Warranty applies only to those parts and 

components sold by Intex. The Limited Warranty does not cover unauthorized alterations, 

repairs or disassembly by anyone other than Intex Service Center personnel.

DO NOT GO BACK TO THE PLACE OF PURCHASE FOR RETURN 

OR REPLACEMENT. IF YOU ARE MISSING PARTS OR NEED  

ASSISTANCE, PLEASE CALL US TOLL-FREE (FOR U.S. AND  

CANADIAN RESIDENTS): 1-800-234-6839 OR VISIT OUR WEBSITE: 

WWW.INTEXSTORE.COM.

 

Proof of Purchase must accompany all returns or the warranty claim will be invalid.

Summary of Contents for Krystal Clear SF10110




























Reviews: