background image

249A

(249IO)  MODEL ECO7221/7231  Cartridge Filter Pump & Saltwater System with E.C.O.  ENGLISH  7.5” X 10.3”  PANTONE 295U  04/13/2017

English

OWNER’S MANUAL

Cartridge Filter Pump & 

Saltwater System

Model ECO 7221  220 – 230 V~, 50 Hz, 230 W

Hmax 3.0 m Hmin 0.19 m IPX4

Model ECO 7231  230 – 240 V~, 50 Hz, 230 W

Hmax 3.0 m Hmin 0.19 m IPX4

MAX. WATER TEMPERATURE 35

o

C

IMPORTANT 

SAFETY RULES

Please read, understand, and follow all 

instructions carefully before installing 

and using this product. Keep for future 

reference.

Don’t forget to try these other fine Intex products: pools, 
pool accessories, inflatable pools and in-home toys, airbeds 
and boats available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex 
reserves the right to change specifications and appearance, 
which may result in updates to the instruction manual 
without notice.

©2017 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.
- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte 
vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous 
licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen 
Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 
28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union 
by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/
Intex Trading B.V., 

Venneveld 9, 4705 RR

 Roosendaal – The Netherlands

www.intexcorp.com

249-*A*-R0-1804

For illustrative purposes only. 

Summary of Contents for ECO 7221































Reviews: