(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017
249A
SAVE THESE INSTRUCTIONS
English
Page 20
Some countries, especially in the European community, require the product to be secured to the
ground or to a base in a permanent upright position. Check your local authorities to determine if there
is a regulation in your area regarding above-the-ground swimming pool filter-pumps. If yes, then the
product can be mounted to a platform using the two holes located in the base. See drawing below.
The product can be mounted on a cement base or onto a wooden platform to prevent accidental
falling over. Total assembly must exceed 18kg. The European norm EN 60335-2-41 requires this
product be secured to the ground or to a base.
1
. The mounting holes are 6.4 mm in diameter and spaced 242.5 mm apart.
2
. Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.
SALTWATER SYSTEM/FILTER PUMP STATIONARY MOUNTING
242.5mm
The power cord plug to the 220-240 volt electrical power source of the filter pump must be
positioned more than 3.5 m away from the pool walls. Check your local authorities to
determine the appropriate standard and requirements for “electrical installation of
swimming pools and basins equipment”. The following table is for reference only:
FILTER PUMP INSTALLATION DISTANCE
International
France
Germany
The Netherlands
Country/Region
Standard Number
IEC 60364-7-702
NF C 15-100-7-702
DIN VDE 0100-702
NEN 1010-702
>2m
>3.5m
POOL
hoses Electrical
device