(188PO) MODEL CS7110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/10/2012
Page 12
English
SAVE THESE INSTRUCTIONS
SETUP
INSTRUCTIONS
(continued)
Connecting
the
system
to
other
types
of
pump
(with
different
type
of
thread
or
no
thread):
The
Saltwater
System
can
also
be
adapted
to
other
filter
pumps
with
different
thread
or
those
without
a
thread
on
the
connection.
Connection
to
1
‐
1/4”
(32mm)
hose:
1.Connect
one
end
of
adaptor
B(9)
to
the
connector
hose(8).
Tighten
securely.
2.Now,
connect
the
other
end
of
adaptor
B(9)
to
the
filter
pump
outlet.
Tighten
securely.
Connection
to
1
‐
1/2”
(38mm)
hose
with
clamp:
1.Connect
the
connector
hose
(8)
to
the
filter
pump
outlet
connection
with
a
large
hose
clamp.
Tighten
securely
Connecting the system to other types of pool
After you have connected the Saltwater System to the pump, connect it to
the pool. This is depicted in Drawings #1 and #2.
Following are the common connection types:
Connection to 1-1/4” (32mm) connectors:
1.
Connect the adaptor A
(1)
to the electrolytic cell
(4)
outlet. Tighten securely.
2.
The adapter A
(1)
is now fitted to the Saltwater System. The following step is to
connect the water return hose to the adaptor A
(1)
with a hose clamp.
Connection to 1-1/2” (38mm) connectors without thread:
1.
Connect the adaptor A
(1)
to the electrolytic cell
(4)
outlet. Tighten securely.
2.
With the adaptor A
(1)
fixed to the Saltwater System, connect the water return
hose to the adaptor, using a large hose clamp.
