(114BS) ELECTRIC POOL HEATER ENGLISH 7.5” X 10.3” PANTONE 295U 08/16/2015
English
114
BS
SAVE THESE INSTRUCTIONS
English
Page 9
ELECTRIC POOL HEATER STATIONARY MOUNTING OPTION
Some countries, especially in the European community, require the electric pool heater to
be secured to the ground or to a base in a permanent upright position. Check your local
authorities to determine if there is a regulation in your area regarding above-the-ground
swimming pool electric pool heaters. If yes, then the electric pool heater can be mounted
to a platform using the two holes located in the base. See drawing below.
The electric pool heater can be mounted on a cement base or onto a wooden platform to
prevent accidental falling over. Total assembly must exceed 18kg. The European norm
EN 60335-2-41 requires this product be secured to the ground or to a base.
1.
The mounting holes are 6.4 mm in diameter and spaced 156 mm apart.
2.
Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.
156
mm
