2
Quick Start
Hook up the Cables!
NOTE! It is important that your PC is switched off now!
•
Use one of the included Ethernet cables to connect the port named
ET1
on the Internet
Gate to the Ethernet port on your PC.
•
Use the other Ethernet cable to connect port
ET2
of the Internet Gate to your broadband
or WAN connection.
(The WAN connection is an RJ45 connector either directly in your wall, or on the back
side of the equipment (eg an ADSL-modem) delivering your broadband connection.)
•
Connect the power adapter and push the
ON
switch.
ON
DC
USB
ET2
ET1
EXP
PC
Ethernet connector in wall,
or on ADSL modem or cable
modem.
For information about how to connect a LAN, please see page 7!
In most cases, the
A
,
B
,
C
steps on this page
will get your Internet Gate up and running.
If you run into problems you find the solution to
the most common problems in this guide.
A