Intertex IX66 Getting Started Download Page 11

  11 

 
5.  If you have got an IP-address to a DNS server from your 

Internet Service Provider (ISP): 

• 

select ”

DNS configuration”

,  

• 

select ”

Activate DNS

”, 

• 

enter the IP address of the DNS server, 

• 

click on ”

Add

”. 

 
6.  Click on ”

OK

”. 

 
 
 
 
 
 
 
 
 
 
 

Check the proxy settings of your web browser 

If your web browser is configured to use a proxy server, you might have problems reaching the built-in 
pages of your IX66 Internet Gate. In that case, turn off usage of the proxy server. 
 

Netscape Navigator:

  

 

select Edit, Properties, Advanced, Proxies: 
”Direct connection to the Internet” shall be selected. 

Internet Explorer:

  

 

select Tools, Options..., Connection, 
LAN-settings: the checkbox ”Use a proxy-
server” must 

not

 be selected. 

 
 
 
 

Log in to WAN 

Some broadband providers require that you log in into their network before you are allowed to use 
their Internet connection. This may be done using a web page, special program, or some other way. 
Please read the documentation you received with your broadband access. 

Summary of Contents for IX66

















Reviews: