Weld-i
TM
HD 625
Instruction & Admin Manual
Page 23 of 47
InterTest, Inc. • 303 Route 94 • Columbia, NJ 07832
+1 (908) 496-8008 •
Released 8-20-21
Arc ON/OFF
Activates the stored shutter value used for welding. Factory Default is 1/500
Preset
This button allows for quick & easy access to the first two stored presets in the QNHD CCU. Saving a
preset saves the current camera setting(s). Two saved presets can be recalled. (See Figure 9)
Figure 16 Preset
Arc Set
Press the switch UP to set the current shutter value the Arc On Value (Figure 16). Press down to
restore to factory default.
Figure 15 Arc On/Off
