Chapter 3
—
General Operation
and Components
Introduction
This chapter describes how to assemble and prepare the system for use. Sections include the following:
◼
Assembly Guidelines
◼
System Assembly Procedure
◼
Control Box Console Functions
◼
Pendant Controller Functions
Assembly Guidelines
After examining the individual components, you are ready to assemble the system. Be sure to follow
these safety precautions as you work:
◼
Keep the system on a flat, level surface at all times.
◼
To unplug a power cord, pull using the plug body and not the cord.
◼
Connect cables and cords for the system first before plugging the power into main power.
◼
When disassembling the system, make disconnecting the main power your first step after
shutting down all individual components’ power.
◼
Never plug the system into an ungrounded outlet.
System Assembly Procedure
IMPORTANT: DO NOT submerge the Camera Head, Control Box, and any other component
in water or any other liquid. When cleaning the Camera lenses, do not use cleaning liquids,
rather use clean non-abrasive lens tissue only. Never use cotton swabs to clean a lens.
