InterTest, Inc. • 908-496-8008
MZ-
5™ HD-UV Inspection System
EM14809 Rev B
Page
34
Version 2.0 • Sept 27 2019
Chapter 4
—
Specifications
Detailed System Specifications
Introduction:
The MZ-5 performs visual examinations of bore ID during the MT process. It provides white and UV
illumination while viewing the surfaces with live HD video or capture of 13 megapixel photos. The MZ-5
builds on the successful MZ-4 HD by utilizing higher performance sensors matched to display and
capture hardware.
Gun Tube Application:
MZ-
5 supports the visual examination of 105, 120, and 155 mm up to 8” gun tube bores on the MPI bench
during the MT process. Tubes are rotated in place on the MPI bench. Tube lengths up to 40’ may be
inspected. The head contains two cameras that can be switched between wide field HD down tube view
and HD right angle view. Both cameras can operate in HD video or 13 MP still capture modes.
Specifications:
1. Video performance
a. HD video for inspection of MPI at 1080p/30 or 1600 x 1200 down tube and side
views
b. Sensor optimized for white and UV examinations
c. 13 MP (4192 x 3104 pixels, 4K type) still image capture down tube and side
views
d. 90º DOV side view
i. Wide field right angle 53º HFOV
1.
2.1” x 1.2” for 105 mm tube
2.
2.4” x 1.3” for 120 mm tube
3.
3.0” x 1.6” for 155 mm tube
ii. Remote focus in either auto or manual modes
e. 0º DOV down tube view
i. 132º x 108º (H X V)
ii. 1600 x 1200 pixels
f. Optical and camera components protected from process fluids
2. Mechanical head and pole
a.
2.25” diameter (permits use of M-3 borescope centering hardware)
b.
28’ base system length (built up from 5’ segments)
c.
43’ max system length achieved by the addition of 5’ extension sections
d. 6 each quick on-off centering fixtures for 105, 120, 155 mm tubes
e. Extension poles marked
for down tube insertion position 1” increments with call
outs at 6” intervals
f. Tube rotation based on MPI bench motorized hardware
3. Illumination
– High performance UV and White LEDs rated 10,000 hour life.
