35
v.
External Light Sensor In: the day/night mode switch is triggered by
light sensor on PT camera , and be synchronized with
via pin5 (refer to page of pin define) communication to make sure ICR
within can be switched with PT camera at the same time
vi.
VISCA: Almost happen on PT camera using its light sensor to
determine switching day/night mode; PT camera needs to trigger
built-in ICR to set correct day and night mode. By UART interface (pin3
& pin4), PT camera can send CAM_ICR VISCA command to IPBC for
triggering IPBC ICR
**for more VISCA CAM_ICR information, please refer t
o p.19 “ICR Switch On/Off
Alarm Receive
” section
IR LED Control Pin
**internal use ONLY
Audio In
** internal use ONLY
Audio Out
** internal use ONLY
Privacy Mask Pipeline
** internal use ONLY
Block Camera Protocol
Available value:
No / Sony / Samsung
Description:
