25
Baud Rates Second Sets – UART setting
Available value:
Baud rate / Data / Parity / Stop
Description:
Select correct value depending on your UART connection with PT camera
Save
Available value:
N/A
Description:
Click “Save” to active above parameters with new value
Access built-in ENGINEERING PAGE – Movement Speed Settings
When completing general settings, you will see and be allowed to set movement speed settings,
this is especially for proportional P/T function
The design philosophy of Pan/Tilt movement speed control on IPBC control panel UI is based on
1°/sec as speed level 1 and 90°/sec as speed level 6
Pelco D:
Pelco P:
Pan Speed Byte:
Pelco D Byte5 (Data 1)
Pelco P Byte5 (Data 3)
