L
M
H
2H
4H
8H
Ion
On/Off
UV
CONTROL PANEL
1.
L
M
H
2H
4H
8H
Ion
On/Off
UV
“ON / OFF“ Button
Press this button to turn on or switch off the unit.
2.
L
M
H
2H
4H
8H
Ion
On/Off
UV
“Timer” Button
a) By pressing this button, the purifier can operate for intervals of 2, 4 or 8 hours, stop-
ping automatically when the selected operating time has elapsed.
b) Press this button
L
M
H
2H
4H
8H
Ion
On/Off
UV
(Timer) to select the required operating time. A warning light
automatically indicates the remaining operating time.
c) To select the
continuous operating mode, press the button repeatedly until there are
no further indicator lights.
3.
L
M
H
2H
4H
8H
Ion
On/Off
UV
“Speed“ Button
The fan speed of the unit can be adjusted when the unit is in operation. Each time that
you press the
L
M
H
2H
4H
8H
Ion
On/Off
UV
(SPEED/ON) button, the speed is adjusted from L (low) to M (medium)
to H (high).
a) When the unit is switched on, it is automatically positioned in L (low) mode.
b) To change this speed, press the
L
M
H
2H
4H
8H
Ion
On/Off
UV
(SPEED/ON) button again. The red LED light indi-
cates the selected speed.
c) We suggest the use of high speed setting for the first 30 minutes of usage.
4.
L
M
H
2H
4H
8H
Ion
On/Off
UV
“Ionisator and UV“ Button:
a) 1st press: Ionizer and UV lamp on.
b) 2nd press: Ionizer off and UV lamp on.
c) 3rd press: Ionizer off and UV lamp off.
30
|
31
GB
The default setting is Ionizer on and UV lamp off. The purifier will be set back to the
default setting after you press the button more than 3 times.
Important note: When the unit is not in use, please switch it off and unplug it.
PRE-OPERATING INSTRUCTIONS
When removing the unit from the packing, check for any shipping damage.
PLEASE FAMILIARISE YOURSELF WITH THE FOLLOWING PROCEDURES BEFORE OPE-
RATING YOUR NEW AIR PURIFIER.
a) Remove the plastic protective wrap from the for 3-in-1 filter pads (HEPA, active
carbon and PCO filters). After removing the protective wrap, re-install the filters in
accordance to the instructions set out in the “filter replacement” section.
b) After installing the filters, choose a suitable location to position the unit.
c) Plug the unit in.
d) See “control panel” section for details on the various features.
CARE AND CLEANING
Plastic housing – Dirt, dust or spots can be wiped away with a damp soft cloth and non-
abrasive cleaner. Treated with care, this high quality air purifier will retain its attractive
appearance for many years.
The pre-filter can be cleaned with a vacuum cleaner and can also be washed in cold
water.
WARNING: Do not wash the 3-in-1 filter pads; they are disposable items.
Summary of Contents for ayce
Page 18: ...34 35...
