Instruction For Use PMH7000
Version 2
Revision 03 23 July 2019
Page 14 of 20
6. Side Panel
6.1 Left Side View
6.2 Left Side Panel Description
1
Power Cord Plug: to be connected AC power supply
2
Probe Connector : Temperature probe connecting port
3
Inspiratory / Expiratory Heater Wire Connector: Heated wire adaptor connecting port
NOTE
: The power cord cannot be detached from the heater base. The power cord should only be replaced by an
approved engineer at the facility where such engineer is stationed.
Warning !
The Humidifier base cable should not be twisted during either connection or
disconnection.
