Disinfection
Spiromatic and Divator mask with breathing valve
Important:
• Always start by washing the mask and breathing valve in accordance with the user
manual and/or separate washing instruction.
• The mask and breathing valve must be disinfected separately.
• Use the disinfectant recommended by Interspiro.
• The Interspiro disinfectant is highly flammable, read the safety data sheet.
• Make sure that there is good ventilation.
• Use the protective equipment stipulated by your organization to protect against virus exposure.
Disinfection of the mask
5 min
• If applicable, open the hatch on
masks fitted with Divator hatch
and Spirohatch.
• Place the mask in the disin-
fectant, make sure that the entire
mask is covered.
• Leave the mask in the disin-
fectant solution for 5 minutes.
Longer exposure times might
cause damage to the equipment.
Max 55°C
!
55204A01
• Thoroughly rinse the mask
in fresh water.
• Shake off excess water.
• Leave the mask to dry. A
drying cabinet can be used,
maximum 55 °C for 2 hours.