Simpli Series System Instructions for Use
29
01-5034-00 R1
Appendix A
–
SimpliVue Software Installation
Do
NOT
plug in the USB ultrasound probe(s) until the software has been installed.
Software Installation:
1.
Insert the flash drive into one of the device’s USB ports.
2.
Locate the installation file
SimpliVueArraySetup_v.X.Y.Z.exe*
on the flash drive.
3.
Copy the installation file to your desktop or other location of your choice.
4.
Remove the flash drive and store it in a safe place.
5.
Go to the location where you saved
SimpliVueArraySetup_v.X.Y.Z.exe
.
6.
Double click on
SimpliVueArraySetup_v.X.Y.Z.exe
.
7.
Go through the installation steps, clicking yes and next when prompted.
8.
Launch the SimpliVue software using the desktop shortcut.
9.
The SimpliVue software will now launch and you are ready to begin imaging.
*The name of the installation file may differ depending on the version of the SimpliVue software.
