Accusafe Sensor Module User Manual
19
06/21/2021
C
licking “Run” then opens the
Launcher window shown on the right.
The first step in connecting the
controller to the browser is adding the
controller to the device list. To do this,
click on the “Files” tab in the menu at
the top
then click on “Add Controller” as
shown to the right.
In the “Add a device” window that
opens as shown to the right, enter the
controller’s IP address. This address
can be found by opening the
controller’s INFO screen noted earlier
in section 3.1.8. The IP address is
noted on the top line of the INFO
screen. Enter this value and click OK.
A message will indicate that the device
was successfully added.
